Furnace Maintenance Service In GTA - Reliable & Affordable Furnace Tune-ups


Keep your furnace running efficiently with professional furnace maintenance and tune-ups in GTA. Our certified HVAC technicians provide tcomprehensive inspections, cleanings, and tune-ups to ensure safe, reliable, and cost-effective heating all winter long. Book your furnace maintenance service today and stay warm all winter.









Cozy Comfort Anytime
Prevent Breakdowns & Save Energy with Expert Furnace Maintenance in GTA
A well-maintained furnace runs efficiently, lasts longer, and reduces energy costs. Our furnace maintenance service includes thorough inspections, filter replacements, burner cleanings, and system tuning to keep your heating system performing at its best. Avoid unexpected breakdowns, costly repairs, and safety risks with professional furnace tune-ups designed for home and business owners in the GTA.
Heat Made Reliable
Comprehensive Furnace Maintenance Services We Offer
Comprehensive Furnace Inspections
Our detailed furnace inspections assess heat exchangers, burners, ignition systems, and venting to detect potential issues early. We ensure proper airflow, gas pressure, and safety compliance.
Annual Furnace Tune-Up & Safety Inspection
A yearly furnace tune-up includes thermostat calibration, combustion analysis, burner adjustments, and airflow testing to enhance performance, safety, and efficiency throughout the heating season.
Air Filter Replacement & System Cleaning
Dirty filters restrict airflow and strain your system. We replace MERV-rated air filters and remove dust, debris, and buildup from internal components to maintain indoor air quality and efficiency.
Blower Motor Cleaning & Lubrication
A poorly maintained blower motor can reduce airflow and overheat. We clean, lubricate, and inspect motor bearings, fan blades, and capacitors to keep your system running smoothly and efficiently.
Heat Exchanger & Burner Cleaning
Cracked heat exchangers and dirty burners can cause carbon monoxide leaks and inefficient combustion. We inspect and clean these components to maximize efficiency and ensure safe operation.
Pilot Light & Ignition System Inspection
A faulty pilot light, hot surface ignitor, or flame sensor can prevent startup. We inspect and adjust ignition systems, thermocouples, and spark electrodes to restore reliable furnace operation.

Gas Furnace Maintenance
Gas furnaces require combustion analysis, burner alignment, and gas valve testing. We check for fuel leaks, proper ignition, and venting issues to ensure safe and efficient heating performance.
Electric Furnace Maintenance
Electric furnaces rely on heating coils, sequencers, and relays. We test high-limit switches, inspect wiring, and verify amp draw to maintain consistent heating output and system longevity. .
Thermostat Calibration & Smart Thermostat Programming
A miscalibrated thermostat affects temperature accuracy and efficiency. We fine-tune settings and program Wi-Fi smart thermostats for precise climate control and energy savings.
Ductwork Inspection & Cleaning
Leaky or clogged ducts reduce efficiency and distribute allergens. We inspect and clean air vents, dampers, and return ducts, sealing any leaks to improve airflow and furnace performance.
Carbon Monoxide & Gas Leak Detection
A malfunctioning furnace can leak carbon monoxide (CO) or gas, posing serious risks. We use combustion analyzers and leak detectors to identify and fix unsafe gas line or exhaust system issues.
Testing the Limit Switch & Safety Controls
Faulty limit switches, pressure sensors, and flame rollout controls can cause overheating and shutdowns. We test and recalibrate these components to ensure safe furnace operation and longevity.
Having a HVAC problem? We’ll FIX it today!
We’re available 24/7 to restore your comfort. Call now for same-day service!
Heating Done Right
How to Know If Your Furnace Needs a Tune-Up
Inconsistent Heating or Cold Spots
Uneven temperatures suggest blocked air ducts, failing blower motors, or incorrect thermostat settings. A furnace tune-up restores proper airflow and heat distribution throughout your home.
Weak or Limited Airflow
A failing blower motor, clogged air filter, or obstructed ductwork can reduce airflow, forcing your furnace to overwork. Routine HVAC furnace maintenance ensures optimal air circulation and efficiency.
Rising Energy Bills
A sudden increase in heating costs may indicate dirty burners, inefficient combustion, or worn-out components. A furnace maintenance service improves fuel efficiency and system performance.
Unusual Noises
Banging, rattling, or screeching sounds could mean loose belts, failing bearings, or an imbalanced blower wheel. A professional furnace tune-up diagnoses and resolves these mechanical issues.
Difficulty Starting the Furnace
A furnace that struggles to turn on or frequently stalls may have a failing ignition system, faulty flame sensor, or a deteriorating thermostat connection, all of which require expert maintenance.
Unusual or Burning Odors
A musty smell signals moisture buildup, while a burning odor may indicate overheated components or dust accumulation in the heat exchanger. A furnace inspection prevents potential fire hazards.
Yellow Pilot Light Instead of Blue
A yellow flame instead of a steady blue pilot light may indicate incomplete combustion or a carbon monoxide leak. Immediate inspection is crucial for safety and proper fuel-burning efficiency.
Frequent Cycling
Short cycling, where the furnace turns on and off too frequently, can be caused by dirty filters, thermostat malfunctions, or overheating limit switches. A tune-up restores proper heating operation.
Qulaity Brands We Work With
From Carrier to Trane – The Best AC Brands We Work With












Cozy Comfort Anytime
No Matter the Type, We Keep All Heaters Running Smoothly
Gas Furnace
Gas furnaces require burner cleaning, gas valve testing, and ignition system inspections. We ensure proper combustion, heat exchanger integrity, and CO safety for peak performance.
Electric Furnace
Electric furnaces use sequencers, heating coils, and high-limit switches. We test electrical connections, blower motor efficiency, and thermostat calibration to maintain consistent heating.
Oil Furnaces
Oil furnaces rely on fuel pumps, combustion chambers, and heat exchangers. Our team cleans burner nozzles, adjusts airflow, and inspects fuel lines to improve efficiency and reduce emissions.
Propane Furnaces
Propane furnaces operate with sealed combustion, modulating burners, and venting systems. We check for gas leaks, adjust flame sensors, and test pressure regulators for optimal heating.
High-Efficiency (Condensing) Furnaces
Condensing furnaces feature secondary heat exchangers and sealed combustion. Our tune-ups include condensate drain checks, combustion analysis, and venting system inspections.
Modulating Furnaces
Modulating furnaces adjust heat output in small increments for precise temperature control. We fine-tune gas valve modulation, blower speeds, and airflow sensors to maximize efficiency.
Hybrid (Dual-Fuel) Furnaces
Hybrid systems switch between gas and electric heating. Our maintenance ensures seamless fuel transitions, thermostat programming, and heat pump-furnace integration for optimal savings.
Single-Stage Furnaces
These furnaces run at full capacity when heating. We inspect burners, ignition systems, and blower motors to ensure smooth operation and prevent energy waste.
Two-Stage Furnaces
Two-stage furnaces switch between low and high heat modes for better comfort. We adjust gas valve settings, clean dual-stage burners, and optimize airflow distribution.
Smart-Enabled Furnaces
Smart furnaces integrate with Wi-Fi thermostats and home automation systems. We update firmware, calibrate sensors, and ensure real-time energy tracking for enhanced climate control.
Heating Done Right
No Matter the Furnace Type, We Can Fix It!
Gas Furnaces
Gas furnaces rely on burners, gas valves, and heat exchangers for combustion. We diagnose and repair pilot light issues, faulty thermocouples, pressure switch failures, and carbon monoxide leaks.
Electric Furnaces
Electric furnaces use sequencers, heating elements, and blower motors to generate heat. Our experts troubleshoot burnt-out heating coils, failed relays, and malfunctioning high-limit switches.
Oil Furnaces
Oil furnaces require nozzle adjustments, combustion chamber cleaning, and fuel pump maintenance. We fix clogged filters, ignition transformer failures, and issues with the draft regulator.
Propane Furnaces
Propane furnaces operate similarly to gas models but require pressure regulators, orifice adjustments, and pilot safety checks. We handle burner misfires, gas leaks, and heat exchanger maintenance.
Dual-Fuel (Hybrid) Furnaces
These furnaces switch between gas and electric heating for efficiency. We recalibrate control boards, repair reversing valves, and optimize thermostat settings for seamless fuel transitions.
Modulating Furnaces
Modulating furnaces adjust heat output in small increments for precision heating. We service modulating gas valves, ECM blower motors, and advanced control systems for optimal comfort.
Two-Stage Furnaces
Two-stage furnaces use low and high-fire settings for energy efficiency. Our team inspects dual-stage gas valves, variable-speed blowers, and ignition systems to ensure smooth operation.
Single-Stage Furnaces
Single-stage furnaces run at full capacity whenever turned on. We troubleshoot worn-out ignitors, dirty burners, and airflow restrictions to maintain consistent heating performance.
High-Efficiency Furnaces
These furnaces use secondary heat exchangers and sealed combustion to maximize efficiency. We service condensation drain lines, variable-speed fans, and venting systems to keep them running efficiently.
Reliable Heating Services
Reliable Furnace Maintenance for Every Property Type
Residential
A well-maintained furnace keeps your home warm, energy-efficient, and safe. Our home furnace maintenance includes blower motor inspections, burner cleanings, heat exchanger checks, and thermostat calibration to prevent breakdowns and high energy bills. We ensure consistent heating, improved indoor air quality, and extended furnace lifespan.
Commercial
Businesses rely on high-performance heating systems to maintain comfort and productivity. Our commercial furnace maintenance service covers rooftop HVAC units, multi-zone heating systems, and ducted furnaces for proper airflow, burner efficiency, and compliance with safety regulations. Preventative HVAC furnace maintenance minimizes downtime and maximizes energy efficiency.

Stay Warm, Always
Furnace Maintenance Checklist
– Clean and inspect burners
– Check and replace air filters
– Inspect heat exchanger for cracks
– Check blower motor and fan blades
– Inspect and calibrate the thermostat
– Check and clean flame sensor
– Inspect pilot light and ignition system
– Check gas pressure and adjust combustion settings
– Test carbon monoxide levels
– Examine ductwork and vents for leaks
Emergency Heating Services
We provide fast, same-day service and 24/7 availability to handle all your heating emergencies. Whether it’s a freezing winter night or a sudden breakdown, our skilled technicians are ready to restore your warmth. Call us now, and we’ll have an expert on the way to your door

Your Heating Experts
Furnace Breakdown in the Middle of Winter? We’re Available 24/7!
A failing furnace in freezing temperatures can be dangerous. Our 24/7 emergency furnace service quickly resolves ignition failures, cracked heat exchangers, faulty gas valves, and blower motor malfunctions. With rapid diagnostics, OEM replacement parts, and expert repairs, we restore safe, reliable heating for homes and businesses across the GTA—anytime you need us.
Reliable Heating Services
Upgrade to a High-Efficiency Furnace for More Savings & Comfort
A high-efficiency furnace maximizes heat output while reducing energy waste. With AFUE ratings of 95%+, these systems feature secondary heat exchangers, variable-speed blowers, and smart thermostat compatibility to enhance indoor comfort, lower utility bills, and improve air quality. Upgrading ensures consistent heating, fewer repairs, and long-term energy savings.

Why to Work with Us
Why Choose Us for Furnace Maintenance in GTA

Years of Experience
We have years of experience servicing all furnace brands and models. Our team can diagnose airflow issues, burner problems, and ignition failures to keep your system performing at its best.

Tailored Solutions
Every furnace is different. We customize maintenance plans based on your system type, heating needs, and energy efficiency goals to ensure the best results.

Licensed & Certified Heating Technicians
Our TSSA-certified technicians follow strict safety standards and manufacturer guidelines. We service gas, electric, and high-efficiency furnaces with expert care.

Comprehensive Heating System Inspections
We check heat exchangers, pilot lights, gas valves, and electrical connections. This helps prevent unexpected breakdowns and costly emergency repairs.

Full-Service Heater Tune-Up & Inspection
We offer comprehensive tune-ups that include blower motor cleaning, burner calibration, thermostat checks, and carbon monoxide testing. This improves efficiency and prevents breakdowns.

Competitive Pricing
We offer affordable furnace maintenance plans with no hidden fees. Our furnace tune-up specials help you save on preventative maintenance and heating system care.

Same-Day & Next-Day Appointments
Need fast service? We offer same-day and next-day appointments across the GTA. Get your furnace maintenance done without long wait times.

Safety-First Approach
Your safety matters. We test for carbon monoxide leaks, gas leaks, venting issues, and flame sensor failures to ensure your system operates safely and efficiently.
Location We Serve
- Brampton
- Burlington
- Concord
- Etobicoke
- Milton
- Mississauga
- North York
- Oakville
- Thornhill
- Toronto
- Vaughan
- Woodbridge
- Georgetown
Frequently Asked Questions
How often should you schedule furnace maintenance?
HVAC professionals recommend annual furnace maintenance, ideally before winter. A yearly tune-up ensures peak efficiency, lower energy costs, and reduced risk of unexpected breakdowns.
What maintenance should be done on a furnace?
Furnace maintenance includes cleaning burners, checking the heat exchanger, replacing air filters, testing the ignition system, inspecting ductwork, and calibrating the thermostat for accurate temperature control.
How much is typical furnace maintenance?
The cost of a furnace tune-up varies depending on the service provider and furnace type. On average, annual maintenance costs range from $100 to $300. Some furnace maintenance companies offer seasonal specials for savings.
Do you offer both furnace installation and repair services?
HVAC Group specializes in reliable furnace installation and expert repair services across Mississauga and surrounding areas. Whether your furnace needs a quick fix or you’re looking for a high-efficiency replacement, our skilled technicians ensure seamless service with long-lasting results. Call us today for trusted heating services in Mississauga!
Can I clean my furnace myself?
While you can replace the air filter and clean around the unit, deeper maintenance requires a professional HVAC technician. DIY cleaning won’t detect gas leaks, heat exchanger cracks, or failing parts, which can pose safety risks.
How do I know if my furnace needs cleaning?
Signs your furnace needs cleaning include reduced airflow, higher energy bills, unusual smells, weak heating, or excessive dust in your home. Regular furnace cleanings improve efficiency and indoor air quality.
Can you use a shop vac to clean a furnace?
A shop vac can remove surface dust from air vents and blower compartments, but it won’t clean burners, coils, or internal components. Professional cleaning ensures thorough dirt removal and system efficiency.
What happens if you don’t maintain your furnace?
Neglecting furnace maintenance leads to higher heating bills, poor airflow, frequent breakdowns, and reduced furnace lifespan. A dirty system can also pose safety hazards like gas leaks or carbon monoxide buildup.
How long does a furnace tune-up take?
A routine furnace maintenance service typically takes 60 to 90 minutes. More complex inspections or furnace repairs may require additional time, depending on furnace condition and service requirements.
Does furnace maintenance help with energy efficiency?
Yes! A well-maintained furnace operates at peak efficiency, reducing energy waste. Replacing air filters, cleaning burners, and adjusting airflow can lower utility bills and extend your system’s lifespan.
Do you offer furnace tune-up specials?
Yes! We provide seasonal furnace tune-up specials near me to make maintenance more affordable. Contact us for current promotions and bundled maintenance plans.